Rubber Cable Protector Parking Ramp 30 × 50 × 10 cm, 1.5-Meter Set (3 Pieces)
Important Notice:
The 1.5-Meter Rubber Portable Ramp Set consists of 3 individual ramp sections. The total usable length of the set is 1.44 meters.
In parking areas, construction sites, or event zones, cables lying on the ground pose a tripping hazard for pedestrians and a crushing risk to the wires themselves. This heavy-duty rubber cable protector ramp, with its 10 cm high profile and durable construction, safeguards your cables and ensures safe passage even in the toughest environments.
Why Choose This Premium Ramp?
2 Wide Cable Channels
Each internal channel measures 3 × 3 cm and protects thick power cables, hoses, or pipes from crushing and damage.
Anti-Slip Surface Pattern
The raised stripe-pattern surface provides superior grip for both vehicles and pedestrians, eliminating the risk of slipping in any weather condition.
Flexible Use (Fixed or Portable)
The mounting holes allow permanent installation when needed, or you can use it as a temporary, portable solution thanks to its solid 36 kg total weight.
Modular Structure
With its interlocking design, multiple ramps can be connected side by side to create a continuous cable protection line of any required length.
Where Are Cable Ramps Used and What Do They Do?
Cables, hoses, or delicate pipes running across the ground create hazards for people and vehicles, while also being vulnerable to crushing and tearing. This heavy-duty rubber cable protector ramp provides a professional solution to this problem. Its high profile and channel structure ensure safe passage and extend the lifespan of your cables.
Construction Sites: Protects generator, compressor, and lighting cables from heavy machinery.
Event and Exhibition Areas: Creates safe pedestrian and vehicle pathways for audio, lighting, and visual system cables.
Factories and Warehouses: Safeguards hoses and cables in areas where forklifts and pallet trucks operate.
Parking Areas and Temporary Routes: Ideal for temporary lighting or irrigation system cables and hoses.
Easy Installation
You can fix the ramp to asphalt or concrete surfaces using the mounting holes with screws and plugs, or use it without installation as a fully portable solution. Mounting hardware is included free of charge.
Technical Features
Number of Pieces: 3 Ramp Sections
Section Dimensions: 30 × 50 × 10 cm
Total Length: 1.44 meters
Width: 30 cm
Height: 10 cm
Weight (per section): 12 kg
Total Weight: 36 kg
Material: Rubber
Colour: Black
Total Reflectors: 6 Yellow Reflective Strips
Number of Channels: 2 (3 × 3 cm each)
Mounting Method: 10 × 120 mm screw and 16 mm plastic anchor (optional)