Plastic Classic Speed Bump Set with Caps –7 Meters
Using the Plastic Classic Speed Bump Set, you can slow vehicle traffic and ensure pedestrian and vehicle safety. These high-impact plastic speed bumps are designed to reduce the speed of vehicles such as cars, trucks, bicycles, etc.
Thanks to their colour options and integrated dual-sided 4+4 Ø 3 cm red-white reflectors, they offer maximum nighttime visibility. Each module weighs 1.5 kg, and each end cap weighs 350 grams. Each body has 4 screw holes, while each cap has 2 screw holes. They are installed onto asphalt or concrete surfaces using lag screws and plastic anchors.
The Plastic Classic Speed Bump body part is 35 cm long, 25 cm wide, and 5 cm high. To form a complete set, you can order the required pieces based on the road's length. Two end caps are mounted at the beginning and end of the set to enhance durability and prevent tire damage during vehicle passage.
The 7-meter Plastic Classic Speed Bump Set includes 19 body parts and 2 end caps, with a net length of 6,74 meters.
Where Can Plastic Classic Speed Bumps Be Used?
They can be safely used anywhere traffic needs to be slowed down.
How to Install the Plastic High-Impact Speed Bump?
Before ordering the Plastic Classic Speed Bump, please measure the width of the road or area where it will be installed. Leave 50 cm of clearance on both the right and left sides of the road.
1. Place the speed bump on the ground and mark the drilling points.
2. Use a hammer drill to make the holes.
3. Place the speed bump modules and fix them to the ground using screws.
4. Use special asphalt speed bump screws and plastic anchors for installation.
The plastic speed bump can be mounted on asphalt, concrete, or interlocking stone pavement. Ensure the surface is flat and free of small stones or mud for better adherence and a longer lifespan.
Screws and anchors for installation are included free of charge.
Click here for the Speed Bump Installation Guide
Technical Features
Net Length: 6,74 meters
Width: 25 cm
Height: 5 cm
Number of Parts: 19 bodies + 2 end caps
Weight: Body 1.5 kg / Cap 0.35 kg
Total Weight: 29,2 kg
Cap Dimensions: 10 x 25 x 5 cm
Body Dimensions: 35 x 25 x 5 cm
Material: Plastic
Colour Options: Yellow-Black, Yellow, Black
Mounting:10 x 120 mm lagscrews and 16 mm plastic anchors