Key Lock Lift Out Parking Post with Anchor (KOD07)

 Lift Out Parking Post with Anchor;

is a practical solution that serves as a parking post and a barrier to prevent unauthorized vehicles from parking in restricted areas.

• Dust and debris prevention cap for the sleeve when the bollard is removed
• Double-key recessed lock with keyless automatic locking
• Reflective bands for nighttime visibility
• Anchor sleeve must be embedded in concrete

Where Can It Be Used?

• Open and closed parking lots
• Storefronts facing the street
• Areas that need to be temporarily closed to traffic

How to Install the Lift Out Parking Post with Anchor?

1. Drill a hole in the ground wide enough for the anchor section.
2. Place the anchored section so that the top is flush with the ground.
3. Secure it by pouring concrete around the base.
4. Once the concrete has fully set, the bollard is ready for use.

Click here for the installation manual.

Technical Features

Dimensions: 70 x 9 cm

Anchor Sleeve Size: 100 x 100 mm (Height: 25 cm)

Material: Steel tube and sheet metal

Coating: Electrostatic polyester powder coating (Outdoor paint)

Thickness: 2.5 mm

Concrete-Embedded Sleeve: Galvanized Coating

GTIP:7326.90.98.00.19