ECO Rubber Speed Bump 40 x 50 x 4 cm, can be used to slow down vehicle traffic and ensure the safety of both pedestrians and vehicles. ECO Rubber Speed Bumps are designed to reduce the speed of cars, trucks, bicycles, and other vehicles. Due to its colour options and the reflectors on it, the plastic high-performance speed bump provides maximum visibility at night. The plastic speed bump bodies have four parts with two screw holes on the caps. It can be mounted onto asphalt or concrete surfaces using trifix screws and anchors.
Each part of the ECO Rubber Speed Bump has a length of 50 cm, a width of 40 cm, and a height of 4 cm. For set construction, you can order as many parts as needed based on the length of the installation area. To enhance the set's durability and prevent tire damage during passage, two ECO Rubber Speed Bump Caps are mounted at the beginning and end of each set.
Where to Use ECO Rubber Speed Bumps?
Plastic Speed Bumps can be safely used wherever traffic needs to be slowed down.
How to Install Rubber Speed Bumps?
1. Before ordering an ECO Rubber Speed Bump, measure the width of the road or area where you plan to install it.
2. Ensure you leave 50 cm of space on both the right and left sides of the bump.
3. Position the bump on the surface and mark the locations for drilling holes.
4. Secure the bump to the surface using screws. You should use special asphalt bump screws and anchors for installation. Rubber speed bumps can be installed on asphalt, concrete, or interlocking stone pavement.
5. Ensure the ground is flat, clear of small stones and mud, and that the parts fit snugly on the surface to extend the lifespan of the speed bump.
Click here for the Delineator Installation Guide
Technical Features
Width: 40 cm
Length: 50 cm
Height: 4 cm
Material: NR / SBR, Rubber
Colour: Black
Reflective: 4 yellow plastic stripes
Weight: 6,5 kg
Mounting: Surface mount with 4 Dowels and Screws
HS Code: 4008.21.90.00.00
Montaj Şekli : 10 x 120 mm Trifon vida ve 14 mm Plastik dubel
Ağırlık :
GTIP:4008.21.90.00.00