ECO- Rubber Speed Bump Cover 40 x 25 x 4 cm; is used to complete speed bump sets, slowing down vehicle traffic and ensuring pedestrian and vehicle safety.
Each part of the ECO-Rubber Speed Bump has a length of 50 cm, a width of 40 cm, and a height of 4 cm. For set construction, you can order as many parts as needed based on the length of the installation area. To enhance the set's durability and prevent tire damage during passage, two ECO Rubber Speed Bump Caps (with a length of 25 cm, a width of 40 cm, and a height of 4 cm) are mounted at the beginning and end of each set.
Where to Use Rubber Speed Bumps?
Speed Bumps can be safely used wherever traffic needs to be slowed down.
How to Install Rubber Speed Bumps?
1. Before ordering a Rubber Speed Bump, measure the width of the road or area where you plan to install it.
2. Ensure you leave 50 cm of space on both the right and left sides of the bump.
3. Position the bump on the surface and mark the locations for drilling holes.
4. Secure the bump to the surface using screws. Use special asphalt bump screws and anchors for installation. Rubber speed bumps can be installed on asphalt, concrete, or interlocking stone pavement.
5. To extend the lifespan of the speed bump, ensure the ground is flat and clear of small stones and mud, and that the parts fit snugly on the surface.
Technical Features
Width: 40 cm
Length: 25 cm
Height: 4 cm
Material: Rubber, NR, SBR
Colour: Black
Weight: 2,5 kg
Mounting: Surface mount with 10 x 120 mm lag bolts and 16 mm dowels
HS Code: 4008.21.90.00.00