Yellow/Black Metal Car Stopper 180x10 cm 60 mm;
Suitable for both indoor and outdoor parking areas.
Usage of Parking Stopper
The parking stopper ensures vehicles park in a proper and orderly manner. It forces drivers to park within their designated space and prevents vehicles from getting too close in double-sided parking spots. In front-of-wall parking, it pre
vents vehicles from hitting the wall, protecting both the car and the structure. It also helps manage traffic flow within the parking area and prevents drivers from using parking lanes as driveways. Designed for long-term use under harsh weather conditions. While prices may vary based on the material used, this iron parking stopper stands out as a cost-effective and preferred solution in many projects.
Equipped with high-quality yellow and white reflective sheeting for enhanced night visibility. Each flange features 3 mounting holes, ensuring a firm ground installation with 6 screws and 6 wall plugs.
Installation Instructions
The parking stopper can be installed on concrete, asphalt, or paving stone surfaces. Holes are drilled using a hammer drill, and the stopper is secured by tightening the screws through the flange holes. In specific projects, it can also be mounted using pre-installed anchor bolts and nuts. For uneven surfaces, such as cobblestones (also known as basalt stones), direct installation is not recommended. In such cases, it is advised to remove the stones at the mounting spots, pour concrete into the cavity, and install the stopper on the newly formed flat surface. It is sufficient to create small square concrete bases for the stopper feet.
Mounting screws and wall plugs are included free of charge.
Click here for the Parking Stopper Installation Guide.
Technical Features
Material: Iron
Length: 180 cm
Height: 10,5 cm
Reflective Type : 3 Honeycomb Reflectors
Pipe Diameter: Ø60 mm,
Pipe Thickness: 2 mm
Colour: Yellow, Black
Weight: 6.000gr + 500gr
Mounting Kit: Includes 6 wall plugs + 6 screws
HS Code:7326.90.98.00.19