TPU Delineator 75 x 8 cm-Yellow; An affordable and functional traffic safety device. It offers a simple and economical solution for parking lot entrances, security checkpoints, road works, and both temporary or permanent area closures. On busy roads, it is used as a lane divider, guide, or lane organiser to alert drivers. The delineator has a flexible structure, resistant to impacts and weather conditions. For enhanced nighttime visibility, it is covered with reflective material. It can be fixed to the ground with screws when needed. Each delineator set ships with 3 anchors, screws, and washers for mounting.
Mounting screws and anchors are included free of charge.
Click here for the Delineator Installation Guide.
Where Can the TPU Delineator 75 x 8 cm-Yellow Be Used?
-
Separating lanes and directing traffic at parking lot entrances/exits
-
Protection and warning at median ends
-
Marking sidewalks and areas where parking is prohibited
-
Creating manoeuvring areas
-
Creating closed-to-traffic zones
-
Guiding traffic at road works and construction sites
-
Marking parking spaces in parking lots
-
Displaying warning signs such as "No Parking," "No Smoking," "Pharmacy Entrance"
-
Marking disabled parking spaces
-
Organising traffic in front of storefronts facing the street
-
Creating warning sets in road works with solar flashers
-
Preventing entry to hazardous areas
-
Defining areas with chains between parking spots
-
Marking forklift and pedestrian paths in industrial facilities
-
Creating storage and machinery operation zones
-
Separating vehicle traffic from pedestrian traffic
How to Install the TPU Delineator 75 x 8 cm-Yellow?
The delineators are fixed to the ground using anchors and screws.
-
Mark the drilling points using the delineator base as a template.
-
Drill the marked points with a drill or demolition hammer, matching the anchor width.
-
Insert the anchors into the ground.
-
Align the delineator holes with the anchors and tighten the screws to secure it.
It can be easily installed on asphalt, concrete, or paving stone surfaces.
Which Surfaces Can It Be Installed On?
Delineators can be mounted on asphalt, concrete, and paving stone surfaces.
-
On paving stones, ensure the ground is solid and well-compacted before installation.
-
For loose paving stones, remove them and fill the area with concrete before installing.
-
The concrete area should be the same width as the delineator’s base.
-
On cobblestone (basalt stone) surfaces, due to unevenness and hardness, it is recommended to concrete an area slightly larger than the base diameter for proper installation.
Cheap Delineator, Budget-Friendly Delineator, High-Quality Delineator? – What to Look for When Buying
The quality of a delineator is determined by:
-
Material composition – The most durable and long-lasting delineators are made from TPU and are heavier, usually at the top of the price range.
-
UV resistance – Prevents colour fading under sunlight, depending on the material blend.
-
Reflective quality – Reflective bands can be standard performance or high performance; better quality increases product cost.
TPE-blend delineators are priced lower but offer reduced durability compared to TPU models.
Technical Features
Height: 75 cm
Diameter: 8 cm
Base Diameter: Ø200 mm
Weight: 1.3 kg
Material: TPU
Colour: Orange-Yellow-Black- Green
Mounting: Surface mount with 10x100 mm lag bolts and 16 mm Plastic dowel
HS Code: 3926.90.97.90.18