Constance MMA Based Acrylic Road Marking Paint 25 kg White; is an MMA-based, acrylic, solvent-based cold application road marking paint.
This paint can be used to mark all types of city streets, intercity roads, parking lots, and various other surfaces. However, it should not be applied over alkyd-based cold road marking paints. It is a single-component road marking paint applied by spraying onto surfaces, and it achieves reflectivity through glass beads sprinkled on the fresh paint. Thanks to the pigments used, they can be produced in any desired colour. Being solvent-based, it is applied using a spray system at a thickness range of 350–800 microns. The drying process occurs through the evaporation of the solvents contained within the paint.
It is formulated to meet the requirements of TS EN 1871 and TS EN 1436 standards.
Standard RAL Colors:
- RAL Blue: 5015 - 5017
- RAL Red: 3020
- RAL Green: 6001
- RAL Yellow: 1023
MMA-based acrylic road marking paints , are widely used on asphalt surfaces, parking lots, for painting curbs and columns, vehicle parking spaces, and sports facilities. They are easy to apply and dry quickly. Due to their fast drying and high resistance to fading, they are particularly favoured as asphalt marking paints. Solvent-based paints have a thick structure that almost completely blocks air passage through the painted surface, making them an ideal choice for indoor and outdoor parking lots and curb and column painting projects.
The paint has a glossy finish and easily adheres to the applied surface. It is commonly used for marking pedestrian crossings, bus stops, sidewalks, and similar areas.
Areas of Use
The MMA-based road marking paint, applied by spraying onto surfaces, is available in a wide range of colours depending on the pigments used. Additionally, thanks to the glass beads incorporated into its single-component structure, it has a reflective property. It can be easily applied to both asphalt and concrete surfaces. The paint dries quickly shortly after application and is highly resistant to wear at all times.
- Indoor and outdoor parking lots,
- Factories,
- Warehouses,
-Public spaces
- Private facilities,
- Curb and column painting in any required area
Application Instructions
Before application, the surface must be dry, dust-free, and free from oil and other contaminants. The air temperature during application should be above 5°C. It is recommended that any existing old paint be cleaned from the surface. For best results, apply using spray equipment. Brush or roller application is also possible if necessary. For a more visible and durable finish, we recommend applying two coats. Due to its fluid consistency, the product does not require thinning, but if necessary, it can be thinned with its special thinner.
Technical Features
Application Temperature: between 5 °C ile 40 °C
Max. Humidity: % 80
Drying Time": 20 min. (Air temperature: 17°C, surface temperature: 22°C, humidity: 49%, wind speed: 6 km/h)
Packaging: 25 kg / Tin
Application Equipment: Airless or pneumatic machine, brush, roller.
Surface: Asphalt and concrete.
Storage:Store in dry, well-ventilated indoor areas. Keep away from open flames.
Cleaning:Tinex (Cellulosic thinner)
Wet Paint Consumption Rate: 800 gr / m²
Glass Bead Application Rate: 350 gr / m²
HS Code:3208.90.91.00.22