Delineator 73 x 7.5 cm ECO, Flexible Bollard (İLT2070)

Delineator 73 x 7.5 cm ECO TPE - Flexible Bollard

Are you looking for an elegant and economic boundary marker that doesn't look bulky in narrow spaces, in front of apartments, or in areas with high pedestrian traffic? 73 x 7.5 cm Eco TPE Delineator creates safe lanes without taking up excessive space. TPE (Thermoplastic Elastomer) material manufactured flexible body is resistant to light impacts.

Why Choose This "Eco" Model?

• Economic Solution: Thanks to its TPE material structure, it is budget-friendly. It provides a significant cost advantage for bulk purchases.
• Flexible Structure: Its "flexible" body bends when a vehicle bumper makes contact, preventing damage to both the vehicle and the product.
• System Upgrade (Important Mounting Detail): The top part of the product is suitable for accessories. However, since the tube diameter is 7.5 cm, standard 8 cm adapters (used for signboards or flashers) may fit loosely.
  ⚠️ Solution: To secure adapters for signboards or flashers, you must fix them to the body using a self-tapping screw. This prevents the adapter from falling off or wobbling.

Application Areas

With its slim structure and economic price, it is preferred in the following areas:

• Sidewalk edges and narrow pedestrian paths
• Parking spaces within apartments and residential complexes
• Vehicle blocking in front of stores
• Temporary road division works

Technical Specifications

• Height: 73 cm
• Tube Diameter: 7.5 cm
• Base Diameter: Ø 18 cm
• Weight: 850 g (± 100 g)
• Material: TPE (Flexible)
• Color: Orange
• Reflective: Night Visibility Reflective Strips
• Mounting: 3-Point Screw and Wall Plug

Package Contents

• 1 Piece 73x7.5 cm Eco TPE Delineator
• Mounting Set: 3 Pieces Screws and Wall Plugs (Included for free).

Installation Instructions

You can follow these steps to fix the product to the ground:

1. The bollard is placed on the point of installation, and the ground is marked through the 3 holes in the base.
2. The marked points are drilled with a drill, and the wall plugs are driven into their sockets.
3. Installation is completed by tightening the screws.